O-RING

1 1

3. REQUIREMENTS

3.1 ;The O-RING must be manufactured in accordance with SAE AS3581 part number AS3581-012, except as amplified or modified herein.;

3.2 Oxygen Cleaning - This material must be cleaned, tested, packaged & labeled by trained personnel and procedures in accordance with MIL-STD-1330, General.

3.3 Marking - This item must be physically identified in accordance with MIL-STD-130.

3.4 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the material will be cause for rejection.