In plain English
The Navy wants Access Cover Seats made to specified shipboard drawings and exact dimensions, using certified MC903 cast nylon or an approved equivalent. This is a total small-business set-aside, and the parts require material testing and quality controls because they are used in a critical shipboard system.
About this bid
3. REQUIREMENTS
3.1 ;The Access Cover Seat must be in accordance with Naval Sea Systems Command drawing 7016077 and ER7016077B66, item 114, except as amplified or modified herein.; 3.2 ;Dimension 1.562 Nominal must be manufactured to 1.582 +/- 0.005 inch. The stack height requirement of ER7016077B66 does not apply.;
3.3 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Access Cover Seat; Material - MC903 (Type 6 cast nylon produced with polyepsilon caprolactam by the direct polymerization process) as manufactured by the Polymer Corporation or equal in accordance with…
Details
- Solicitation number
- N0010426QNE42
- Agency
- DEPT OF DEFENSE
- Notice type
- Solicitation
- NAICS
- 332510 · Hardware Manufacturing
- Classification (PSC)
- 5340
How to access this bid
Click “View the original posting” to open the opportunity on the portal.
First click may land you on the portal’s homepage — just click it again and it goes straight to the bid.
You may need a free account to view documents — and for plenty of bids you won’t.